Sending Schneider Citect SCADA logs to LogPoint

Share

Collecting logs from Schneider Citect SCADA and sending them to LogPoint could be complex because of the unique combination of the log source and the desired destination. This post will show you how to forward log data from Schneider Citect SCADA to LogPoint by incorporating the NXLog log collection tool.

Schneider Citect SCADA

Citect SCADA is a Supervisory Control and Data Acquisition solution from Schneider Electric that is typically deployed in the manufacturing industry for monitoring and controlling production equipment and the delivery of utilities. Citect SCADA can monitor your operational systems in real time and retrieve important plant-related data since it is the primary user interface in your production environment. It is used in large manufacturing plants as well as smaller facilities for analyzing data using enhanced configuration capabilities.

Collecting Citect SCADA logs

Citect SCADA produces a wide variety of logs about its operation. Some of these logs are maintained in Windows Event Log, but most are available only as flat files.

Due to the critical nature and scope of the systems Citect SCADA controls, there is no room for error. Its stable, uninterrupted operation is crucial to plant safety. Although the logs Citect SCADA generates contain valuable information about the systems it controls, the relatively high level of log noise and the lack of a consistent log format present some challenges.

NXLog Enterprise Edition is a lightweight, modular log collection tool capable of tackling the most demanding cases log collection may pose. Its rich features allow it to read almost any log format and parse fields to produce structured data for further processing. It is the perfect tool for monitoring and collecting Citect SCADA logs.

Collecting Citect SCADA logs from Windows Event Log

Windows Event Log is the primary logging facility on the Windows platform. The logs Citect SCADA generates contain driver traffic, updates, and system-related information. Citect SCADA creates two separate Windows Event Log entries for Schneider Electric: SUT Service for Schneider Electric software updates and Runtime Manager logs. It can also read data directly from the Schneider Electric SUT Service source.

Collecting Citect SCADA logs from file

File-based Citect SCADA logs include changelog, syslog, tracelog, and software update logs. These logs are stored in the C:\ProgramData\Schneider Electric\Citect SCADA 2018\Logs directory and, in most cases, do not follow a consistent formatting scheme.

Network Monitoring on Citect SCADA

NXLog has a unique feature that enables it to collect events from the communication channels between Citect SCADA devices and other computers on the network. NXLog’s passive monitoring of network traffic along with its ability to monitor most network protocols commonly used by SCADA systems, and generate logs from such network activity, make it a valuable logging tool when used with Citect SCADA.

The easiest way to collect and normalize Citect SCADA log data is to use NXLog. With its unique capabilities, it can collect logs from literally any file in any format. Given the wide variation in format and structure of such log files, NXLog is ideally suited for these systems.

For more information on integrating NXLog with Citect SCADA, see the Schneider Electric Citect SCADA integration guide.

The sources mentioned above and NXLog’s features play an important role in normalizing logs accepted by LogPoint.

Sending logs to LogPoint

LogPoint is a SIEM solution that monitors and analyzes log data. It offers real-time threat detection and response and visualizes aggregate event data collected from different sources.

Log sources

For LogPoint to accept logs from a source, it must first be added to its device repository. NXLog can integrate directly with LogPoint by sending log data to it in syslog format over TCP or UDP. NXLog also supports receiving logs from the LogPoint Raw Syslog Forwarder (RSF).

Forwarding logs

LogPoint provides the LPA_Windows and JSONCompiledNormalizer compiled normalizers to parse events from Windows Event Log, requiring data to be in JSON format. NXLog can forward events compatible with the format required by these normalizers using the JSON (xm_json) extension module.

NXLog can forward logs to LogPoint over a secure channel using the om_ssl output module. By default, LogPoint’s Syslog Collectors listen for secure connections on port 6514 and use certificates located in the following path: /opt/immune/etc/remote_connection/certificates/

For more information on configuring NXLog and sending logs to LogPoint, see the LogPoint integration guide in the NXLog User Guide.

NXLog Ltd. develops multi-platform log collection tools that support many different log sources, formats, transports, and integrations. The tools help administrators collect, parse, and forward logs so they can more easily respond to security issues, investigate operational problems, and analyze event data. NXLog distributes the free and open source NXLog Community Edition and offers additional features and support with the NXLog Enterprise Edition.

This document is provided for informational purposes only and is subject to change without notice. Trademarks are the properties of their respective owners.