We have the following problem. We are currently migrating from REDIS to KAFKA on our windows server 2012 machines. In order to do this we are changing our nxlog.conf. (see below for entire configuration) We cannot seem to get our certificates to work. Something to note is that the same certificates work on a linux machine in the same environment (acceptance) Kafka is configured correctly, so that isn’t the problem. (considering that it works in a similar setup for a linux machine that connects to the same KAFKA topic with the same certificates.) When we start the nxlog service like this, the service basically is stuck on the starting phase of the service configuration. We need to force kill the PID to breath live back into it. We changed the .jks (java keystore) into a .p12 extension via a keystore manipulator (keystore explorer), since we do not have JAVA running on these windows machines. When we put Loglevel on DEBUG we get logging up until the kafka_out module but not further. (i.e. No information about handshaking etc.) In the configuration we tried o Protocol SSL with CAFILE and either (CertKeyFile and KeyPass) or (Keyfile as a cer file) o We didn’t try converting it to a PEM. o I put the Partition parameter on comment, since we use multiple partitions in our Kafka-bus, so it wouldn’t make sense to aim for the first one all the time. (Noting that even if not commented out it also fails) We use a root and an intermediate certificate for our CA-path. There are hardly any examples for om_kafka modules, especially when you have more than 1 broker. We are running with version nxlog-4.5.4503 Information I could find on the WWW CAFile %CERTDIR%/cert-bundle.pem CAFile %CERTDIR%/cacert.pem CertFile %CERTDIR%/client-cert.pem CertKeyFile %CERTDIR%/client-key.pem KeyPass yourPasswordOfTheKey #CAFile: This specifies the path of the certificate authority (CA) certificate, which will be used to check the certificate of the remote brokers. CAFile is required if Protocol is set to ssl or sasl_ssl. #CertFile: This specifies the path of the certificate file to be used for the SSL handshake. #CertKeyFile: This specifies the path of the certificate key file to be used for the SSL handshake. Primary questions: Can CAFILE be used with a keystore or only with a .PEM / .CRT file? KeyPass is related to CertKeyFile. If there is a password on either CAFILE or KEYFILE how do I configure this then? Is there a higher level of debug so we can see what happens after the statements in our logging? NXLOG.CONF --GENERAL SETTINGS----------------- envvar COMPUTERNAME define ROOT O:\NXLOG define ENV PRD define APPLI MyPortal KAFKA omgeving define KAFKA_TOPIC mon_myportal_topic define KAFKA_BROKERLIST_PROD 'kafka-0.intranet:9093,kafka-1.intranet:9093,kafka-2.intranet:9093,kafka-3.intranet:9093,kafka-4.intranet:9093,kafka-5.intranet:9093,kafka-6.intranet:9093,kafka-7.intranet:9093,kafka-8.intranet:9093,kafka-9.intranet:9093,kafka-10.intranet:9093,kafka-11.intranet:9093' ---------------------------------------------------------------------- Moduledir %ROOT%\modules CacheDir %ROOT%\data SpoolDir %ROOT%\data CertDir %ROOT%\cert LogLevel DEBUG LogFile %ROOT%\log\nxlog.log #Pidfile %ROOT%\test\nxlog.pid ---------------------------------------------------------------------- <Extension json> Module xm_json </Extension> <output kafka_out> Module om_kafka BrokerList %KAFKA_BROKERLIST_PROD% Topic %KAFKA_TOPIC% Partition 1 Protocol ssl CAFile %CertDir%\client.truststore.p12 CertFile %CertDir%\intermediairportal-PRD.crt CertKeyFile %CertDir%\intermediairportal-PRD.p12 KeyPass <password obfuscated> </Output> include %ROOT%\conf\check1.conf include %ROOT%\conf\check2.conf